Calibration - TEXA ACKF01 Manual Del Usuario

8.4

Calibration

It is suggested, at least once per year, to verify the proper functioning of the refrigerant
electronic scale and the pressure transducer.
Calibration of these two components is indispensable, and for this reason a specific program
has been studied to facilitate the user in this operation.
Oil/UV electronic scale calibration is necessary if the load cell or the PC board is replaced or
when it seems not working properly. The Oil/UV scale reset is enough to insure proper
functioning.
NOTE: To perform these operations, refer to Konfort units operating manuals.
ACKF01_GB_00 TEXA S.p.A. 120/122