Senior Settings; Slecting/Editing The Splice Mode; Select Splice Mode According To Optical Fiber Types - ADInstruments AD300 Manual De Usuario

_____________________________________________________________________
<2> Press
4

Senior Settings

4.1 Selecting/editing the Splice Mode
Select splice parameters according to the optical fiber types,
because different fibers need different splice parameter. The
suitable parameters based on the current specified optical fiber
types are stored in the Fusion Splicer. These parameters can also
be copied into the options which can be adjusted by the user.
These data can be emitted when some unusual fibers are spliced.

4.1.1 Select Splice Mode according to optical fiber types

In the Fusion Operation option, the user can select a suitable
Splice Mode according to the current optical fiber types.
<1> In the "Splice Mode menu", press
enter [Selecting/editing the Splice Mode]. Press
and then the list of "editing splice parameter files" is
displayed. See the following pictures.
<2> In this menu, the user can select specified splice parameters
according to the spliced optical fiber types. Each splice
parameter is marked with the suitable optical fiber types.
©Copyright Abacanto Digital SA.
interface, or after fusion is completed, press
enter the [Help] screen. See the following picture.
to return to the previous operation interface.
Manual de usuario AD300
AD Instruments
to
to select and
to enter,
149