ADInstruments AD300 Manual De Usuario página 132

_____________________________________________________________________
If the "Step I of discharge calibration" displays as "not completed", the
"Step II of discharge calibration" will not start. However, auto current
setting has started and memorized in the machine; thus the operator
should repeatedly prepare and arrange the fiber according to the clue.
"Step II of discharge calibration" will automatically start as soon as "Step
I of discharge calibration" is completed. See the following picture.
The operator should repeatedly prepare the fiber so that the
Fusion Splicer can achieve auto discharge calibration, until
the Fusion Splicer indicates that "Step II of discharge
calibration completed", which means the process of
discharge calibration (Step 1 and Step 2) is finished. After
three consecutive completions of the "Step II of discharge
calibration", the Fusion Splicer automatically exits from the
discharge calibration interface and enters "Splice Mode
menu" operation interface.
©Copyright Abacanto Digital SA.
Step I of discharge calibration
Step II of discharge calibration
Manual de usuario AD300
AD Instruments
132