Battery Supply Operation; Checking Of Battery Capacity - ADInstruments AD300 Manual De Usuario

_____________________________________________________________________

2 3 Battery supply operation

The user may choose to use the polymer lithium battery in the
splicer to separately supply for the Fusion Splicer.

2.3.1 Checking of battery capacity

When the power module is not in the charged state, press
the "PUSH" button on the flank of the power module. Then
the four battery capacity indicator (red) lights on the left
side will be bright. The number of the lit light represents
the highness or lowness of the battery capacity. See the
following table.
When the power module is in the charged state, the four
battery capacity indicator (red) lights on the left side will
be bright, which only represents the highness of the current
charge voltage, but the capacity of the battery.
The capcity level of battery is as follows: (when presses the
Push beside the power module):
Notes: the capacity of the built-in polymer lithium battery of the
80%
Battery capciy Battery capciy
12.2V
The lights are bright
©Copyright Abacanto Digital SA.
60%
Battery capciy
11.8V
Manual de usuario AD300
AD Instruments
40%
Battery capciy
15%
11.4V
The lights are bright
Battery capciy
10%
11V 11V
106