_____________________________________________________________________
power module: 11.1V⁄8000mAH.
2.3.2
Battery charging
<1> Whether the battery capacity is in adequacy, every time
the AC power adapter is inserted into "POWER INPUT
"on the Fusion Splicer power module, the power module
will start a charging process.
<2> Display of charged state: During the charging, the
charging indicator (CHARGE) light is red; after the
charging completion, the charging indicator (CHARGE)
will be green.
<3> When the splicer is shut down, the maximum charging
time is three hours 40 minutes, and the shortest is 40
minutes. The length of the charging time is dependent on
the current battery capacity of the splicer.
<4> If the splicer is charged when it is active, the charging
time should be longer. The user is recommended to
charge the battery when the splicer is shut down, thus the
charging time will be shortened.
2.3.3 Operation of power saving mode
The user can set the splicer to power saving mode or shut it
down within certain duration of time to save unnecessary
loss of battery capacity. See [Application Menu] (Section
3.3) for detail.
2.3.4 Under Voltage Alarm
This model of fusion splicer has the function of "Under
Voltage Alarm". If the capacity of the lithium battery is
lower than the specified value (the default value is around
10.3V), the splicer will automatically alarm and lock the
keyboard to disable input. The user should press
the Fusion Splicer is shut down, and charge the lithium
battery pack as soon as possible, or use the adapter to
supply power. See the following pictures.
2.3.5
The other considerations
<1> Before using fusion splicer, check the capacity level of the
battery, if the capacity is relatively low or Under Voltage
Alarm; please promptly charge the lithium battery pack as
soon as possible, or use the adapter to supply power.
<2> Use the AC/DC adapter supplied by the Company to give
©Copyright Abacanto Digital SA.
Manual de usuario AD300
AD Instruments
until
107