Features; Functional Overview; Instructions For Use - Reer 3004 MIDI Manual Del Usuario

Features :

- No installation required; ready-to-operate
- Noise transmittal activation by the infant (Principal of voice activation)
- Clear reception and equipped with a highly sensitive microphone for the transmittal of even the
slightest sounds
- Clear and easy LED display with all important functions.
- Sensitivity level and volume is adjustable
- Corded operation or battery operation; rechargeable AAA batteries or alkaline batteries. Batteries
can be recharged while in the unit (only included batteries please)
Functions:
- 2 selectable channels (Channel A & channel B) for SENDER and RECEIVER - 2 selectable channels (Channel A & channel B) for SENDER and RECEIVER
- 3 levels of sensitivity for SENDER unit
- Volume control for RECEIVER unit
- LED display and acoustic warning signal if RECEIVER and SENDER units exceed operational range - LED display and acoustic warning signal if RECEIVER and SENDER units exceed operational range
- LED battery check light and acoustic warning when battery runs low - LED battery check light and acoustic warning when battery runs low
- LED volume level for RECEIVER unit
- CODE-CONTROL, user adjustable (8 combinations) to avoid interference with other electrical - CODE-CONTROL, user adjustable (8 combinations) to avoid interference with other electrical
devices that operate within the same frequency range devices that operate within the same frequency range
- Vibration alarm for RECEIVER unit (optional) - Vibration alarm for RECEIVER unit (optional)

Instructions for Use:

1. When charging the unit for the first time: insert three rechargeable 1.2V batteries into the 1. When charging the unit for the first time: insert three rechargeable 1.2V batteries into the
SENDER and RECEIVER unit and charge for at least 12 hours. The unit is operational during the SENDER and RECEIVER unit and charge for at least 12 hours. The unit is operational during the
charging process.
2. Push the ON/ OFF button on the SENDER and RECEIVER unit to turn the entire unit on. 2. Push the ON/ OFF button on the SENDER and RECEIVER unit to turn the entire unit on.
3. Hold down the „M"-button until channel ‚A' or ‚B' starts blinking. Now select the up- or down- 3. Hold down the „M"-button until channel ‚A' or ‚B' starts blinking. Now select the up- or down-
option to select a channel. Push "M"-button again to confirm. option to select a channel. Push "M"-button again to confirm.
4. Hold down the „M"-button of the SENDER unit until the sensitivity display flashes. The level of 4. Hold down the „M"-button of the SENDER unit until the sensitivity display flashes. The level of
sensitivity increases via 3 LED-displays from left to right, from low to medium to high accordingly. sensitivity increases via 3 LED-displays from left to right, from low to medium to high accordingly.
5. Now select the up- or down-button on the RECEIVER unit to select a volume level. The volume 5. Now select the up- or down-button on the RECEIVER unit to select a volume level. The volume
increase is displayed via flashing LEDs from left to right. increase is displayed via flashing LEDs from left to right.
6. Now test the units by making a sound close to the SENDER unit. The sounds should clearly be 6. Now test the units by making a sound close to the SENDER unit. The sounds should clearly be
heard via the RECEIVER unit.
page 13
3004.indb 13 30.04.2008 17:46:21