Ovlac CHISEL CH-7 Manual De Instrucciones Y Repuestos página 52

TABLA / TABLE 16 GRADA PLEGABLE / FOLDING HARROW / HERSE PLIEGE
REFERENCIA
51000045 CILIND.PLEG.GRADA/MINI/MCH 80/40/470
53000004 ENGRASADOR MT-503 8*125
60000028 TORN.EXAG.DIN-931 1"* 90 SAE 8.8
60000138 TUER.AUTO.DIN-980 1"SAE 8.8
60000142 TUER.AUTO.DIN-980 12 8.8
60000270 TORN.EXAG.DIN-931 12*160 8.8 ZINC.
61000031 ARAND.STANDARD 26 ZINC.
62000010 PASADOR ELAST.DIN-1481 8* 40 ZINC.
70021910 BRAZO ANTER.SOP.GRADA ABAT.
70021911 BRAZO POST.SOP.GRADA ABAT.
70021912 BIELA GRADA ABAT.
70021913 BULON D=25*135mm.BIELA GRADA ABAT.
70021914 BULON D=25*172mm.BIELA/CIL.GRADA/MINI
70021920 PIE APOYO GRADA ABAT.
70021921 LLANTA FIJ.PIE GRADA ABAT.
70154905 BULON D=25*110mm.CILIND.MINI/GRADA/MCH
ESPAÑOL
HARROW FOLDING CYLINDER 80/40/470 D.E.
GREASER MT-503 8*125
BOLT D-931 1"*90 8.8
SELF LOCK NUT D-980 1" SAE 8.8
SELF LOCK NUT D-980 12 8.8
BOLT D-931 12*160 8.8
WASHER D-125 26
ELASTIC PIN D-1481 8*40
FRONT ARM CH FOLD.DISC HARROW
REAR ARM CH FOLD.DISC HARROW
ROD CH FOLD.DISC HARROW
PIN 25*135 (FOLD.HARROW ROD)
PIN 25*172 (FOLD.HARROW ROD/CYLIND.)
FOLD.HARROW STAND
FOLD.HARROW STAND LOCKING PLATE
PIN 25*110mm CYLIND MCH
INGLES
52
FRANCES
VERIN REPLAIGE HERSE 80/40/470 D.E.
GRAISSEUR MT-503 8*125
VIS D-931 1"*90 8.8
ECROU AUTOBL. D-980 1" SAE 8.8
ECROU AUTOBL. D-980 12 8.8
VIS D-931 12*160 8.8
RONDELLE D-125 26
GOUJON ELASTIQUE D-1481 8*40
BRAS AVANT HERSE DISQUES REPL.CH
BRAS ARRIER HERSE DISQUES REPL.CH
BIELLE HERSE DISQUES REPL.
BOULON 25*135 (BIELLE HERSE REPL.)
BOULON 25*172 (BIELLE-VERIN HERSE REPL.)
BEQUILLE HERSE A DISQUES REPL.
PLAQUE BLOCAGE BEQUILLE HERSE REPL.
BOULON 25*110mm VERIN REPL