Attaching The Carrycot Apron; Adjusting The Carrycot Hood; Fitting The Carrycot; Removing The Carrycot - Kiddy evostar1 Manual De Uso

4.2. Attaching the carrycot apron.

Fasten the zip of the apron to the zip on the carrycot and pull all the way around
(fig. 25).

4.3. Adjusting the carrycot hood.

Depress the buttons on the side of the hood (fig. 26; no. 1) and pull up until you
hear it click into place (fig. 26; no. 2).
Depress the buttons again to put the hood down. The carrycot hood has an inter-
mediate position (45 degrees) to allow viewing when the carrycot is used in the
tandem mode, lower position.

4.4. Fitting the carrycot.

Lower the carrycot onto the chassis parent facing. Insert the carrycot legs into
the main housings on the chassis and push down firmly until it clicks and locks
onto the chassis (fig. 27).
WARNING
Ensure the carrycot is locked in place on the
chassis before use.

4.5. Removing the carrycot.

Depress the buttons on the side of the carrycot (fig. 28; no. 1)and lift upwards
from the chassis (fig 28; no. 2).
WARNING
The KIDDY carrycot is suitable for a child who
cannot sit unaided, rollover or push itself up on
its hands and knees.
EN
20 20