Attaching The Carrycot Apron; Adjusting The Carrycot Hood; Fitting The Carrycot; Removing The Carrycot - Kiddy Evostar 1 Manual De Instrucciones

5.2 Attaching the carrycot apron

Fasten the zip of the apron to the zip on the carrycot and pull all the
way around ( g. 25).

5.3 Adjusting the carrycot hood

Depress the buttons on the side of the hood ( g. 26, no. 1) and pull up
until you hear it click into place ( g. 26, no. 2).
Depress the buttons again to put the hood down.
has an intermediate position (45 degrees) to allow viewing when the
carrycot is used in the tandem mode, lower position.

5.4 Fitting the carrycot

Lower the carrycot onto the chassis parent facing. Insert the carrycot
legs into the main housings on the chassis and push down rmly until
it clicks and locks onto the chassis ( g. 27).
WARNING
Ensure the carrycot is locked in place on the chassis
before use.

5.5 Removing the carrycot

Depress the buttons on the side of the carrycot ( g. 28, no. 1) and lift
upwards from the chassis ( g 28, no. 2).
WARNING
e Kiddy carrycot is suitable for a child who cannot
sit unaided, rollover or push itself up on its hands
and knees. Maximum weight of the child 9 kg.
EN
e carrycot hood
13