Chassis; Fitting/Removing The Front Wheels; Fitting/Removing The Rear Wheels; Opening The Chassis - Kiddy evostar1 Manual De Uso

EN
WARNING
The maximum weight for the shopping basket is
2 kg.
WARNING
Only use the Evostar 1 seat units, carrycots, ac-
cessories and car seats recommended by KIDDY.

2. Chassis

2.1. Fitting/removing the front wheels.

Press the quick release button on the back of the wheel housing on the chassis
and push the front wheel onto axle (fig. 1).
The wheels are marked L for left and R for right from the perspective of standing
in front of the chassis.
Important: Check the wheels are secure by pulling downwards.
To remove; press the quick release button on the back of the wheel housing on
the chassis and pull the wheel away from the axle.

2.2. Fitting/removing the rear wheels.

Press the button in the centre of the rear wheel and push onto the rear wheel
housing (fig. 2; no 1). Important: Check the wheels are secure by pulling out-
wards.
To remove; press the button in the centre of the rear wheel and pull the wheel
away from the wheel housing (fig.2; no. 2).

2.3. Opening the chassis.

Ensure the chassis is stood upright. Push the travel locks down on the side (fig. 3;
15 15