To Install On The Steering Column; Additional Information - Pioneer MVH-X300BT Manual De Instrucciones

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 26 Friday, March 16, 2018 4:39 PM
Microphone clip
To install on the steering
column
1
Slide the microphone base to
detach it from the microphone
clip.
Microphone
Microphone clip
Microphone base
2
Install the microphone on the rear
side of the steering column.
26
En
Troubleshooting
The display automatically returns to
the normal display.
 No operations have been made for
about 30 seconds.
Double-sided tape
– Perform an operation.
The repeat play range changes
unexpectedly.
 Depending on the repeat play
range, the selected range may
change when another folder or
track is being selected or during
fast forwarding/reversing.
– Select the repeat play range
A subfolder is not played back.
 Subfolders cannot be played when
[FLD] (folder repeat) is selected.
– Select another repeat play range.
The sound is intermittent.
 You are using a device, such as a
cellular phone, that may cause
audible interference.
– Move electrical devices that may
The sound from the Bluetooth audio
source is not played back.
 There is a call in progress on a
Bluetooth-connected cellular
phone.

Additional Information

 A Bluetooth-connected cellular
 The connection between the unit
Error messages
Common
again.
AMP ERROR
 This unit fails to operate or the
 The protective circuit is activated.
be causing the interference away
NO XXXX (NO TITLE, for example)
from the unit.
 There is no embedded text
MVH-X300BT/MVH-X700BT/MVH-S315BT
19_812_813ME_QRI3105(B6_Horizon)
– The sound will be played back
when the call is terminated.
phone is currently being operated.
– Stop using the cellular phone.
and the cellular phone is not
established correctly after a call
made by a Bluetooth-connected
cellular phone.
– Make a Bluetooth connection
between the unit and the cellular
phone again.
speaker connection is incorrect.
– Check the speaker connection.
– Turn the ignition switch OFF and
back to ON again. If the message
remains, contact your dealer or an
authorized Pioneer Service
Station for assistance.
information.
– Switch the display or play another
track/file.