Display Indication; Resetting The Microprocessor; Detaching The Front Panel; Preparing The Remote Control - Pioneer MVH-X300BT Manual De Instrucciones

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 5 Friday, March 16, 2018 4:39 PM

Display indication

Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the button is pressed.
Appears when a traffic program is received.
Appears when the TA (traffic announcements) function is set
(page 17).
BASS Appears when the BASS button is pressed or [HI]/[LOW] is
selected in [D.BASS] (page 19).
Appears when random/shuffle play is set (except when BT AUDIO
is selected as the source).
Appears when repeat play is set (except when BT AUDIO is
selected as the source).
Appears when a Bluetooth connection is made (page 9).

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices
attached to the front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.

Resetting the microprocessor

The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Remove the front panel (page 5).
2
Press the RESET button with a pointed instrument longer than 8 mm.

Preparing the remote control

Remove the insulation sheet before use.
Attach
RESET button
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (–) poles orientated properly.
MVH-X300BT/MVH-X700BT/MVH-S315BT
19_812_813ME_QRI3105(B6_Horizon)
5
En