Step 5 - Make Electrical Connection; Step 6 - Install Range - Haier HCR2250AGS Instrucciones De Instalación

STEP 5 - MAKE ELECTRICAL CONNECTION

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
1. Slide range close to final location.
2. Plug into a grounded 3 prong outlet.

STEP 6 - INSTALL RANGE

IMPORTANT: If the range is moved to adjust the leveling legs, make sure when you
move the range back into its final location that the anti-tip bracket is engaged by
repeating steps 1 through 8.
1. Slide range into final location, making sure rear leveling leg slides into anti-tip
bracket. Leave a 1" (2.5 cm) gap between the back of the range and the back wall.
2. Place the outside of your foot against the bottom front to keep the range from
moving, and then grasp the back of the range, as shown.
18
WARNING
Electrical Shock Hazard