Tabla de contenido
MoniTorr Connectivity Kit Installation Proce-
dure
1.
Install the File VT Serial Address Configurator
on PC (launch VT-SAC\setup.exe on CD
Rom)
2.
Connect the RS232 cable between the PC
serial port and the first TV 2KG serial port
3. Launch the VT Serial Address Configurator
program
4. Set the Serial Communication as following:
a.
Baudrate 9600
b.
COM Port = Your PC COM Port Number
(generally COM1)
c.
Numeric: a different address for each
pump (0..1..2.....31)
d.
Click on "Set the new address" button
5. Close the VT Serial Address Configurator pro-
gram
6. Repeat all operations from the point 2 choos-
ing a new address for each pump
7. Install the MoniTorr File Download Program
PC (FileDW\Setup.exe on CD rom); see In-
stalling the File Download Software paragraph
8. Connect the RS232 cable from PC to Protocol
Converter
9. Connect the RS485 cable between the proto-
col converter and the network connector of
each pump
10. Check if Baud Rate of protocol converter is
fixed at 115K2 (switch between 9 position and
F position)
11. Connect the power supply to protocol con-
verter
12. Launch the file download software
13. Select menu File/Download Mode and check
the following fields:
•
Trigger 1
•
Mode: Number of file (# file)
14. Select menu File/Archive Time and select the
number of days for a periodical file download
to be sent (for example 7 days)
15. Read the Archive Saving Method Procedure
Paragraph
16. Start the system
The computer must be always connected to the
MoniTorr. Please, be sure that the PC hasn't
automatically Standby or Suspend procedure ac-
tive.
82
TECHNICAL INFORMATION
NOTE
87-900-968-01(C)
Tabla de contenido
