Emptying The Pulp Container And The Filter - Silvercrest SFEE 800 A1 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2) Hold the pusher 1 in one hand and feed the fruit or vegetable pieces with the
other hand into the feed tube 2. Always use the pusher 1 to carefully press
the fruit/vegetable pieces into the feed tube 2. While the fruit/vegetables
are being processed, insert further pieces into the feed tube.
Do not switch the appliance off.
NOTE
Add carrots one after the other into the feed tube 2: the top of the carrot
must be at the bottom and the pointed end at the top.
NOTE
To avoid fruit or vegetables becoming blocked in the feed tube 2, only
fill it when the appliance is switched on. If fruit or vegetable pieces get
stuck in the feed tube 2 and cannot be promptly freed with the pusher 1,
proceed as follows to avoid damage to the appliance:
3) Always switch the off appliance immediately after all of the fruit/vegetables
have been processed.
CAUTION! PROPERTY DAMAGE!
To avoid blockage of the juice outlet 6 and/or damage to the appliance,
clean the juice outlet 6 and the juice tank 5 regularly and after every use.
Emptying the pulp container and the filter
You can extract juices continuously until the container for fruit and vegetable
pulp q is completely full.
WARNING! RISK OF INJURY!
Remove the plug 8 from the power outlet when emptying the filter w.
This prevents unintentional starting of the appliance.
If the extracted juice suddenly starts getting thicker, or if you hear that the motor is
running more slowly, the filter w needs to be emptied. When you have removed
the fruit pulp, reassemble the appliance.
54 
GB │ MT
Switch the off appliance immediately and pull the power plug 8
from the wall socket.
Undo the clamps 4 and remove the lid 3.
Remove the fruit or vegetable pieces causing the blockage.
Reassemble the appliance and continue with juice extraction.
SFEE 800 A1
Tabla de contenido
loading

Tabla de contenido