Using The Stove - Dometic ORIGO 1500 Instrucciones De Uso

Using the stove

➤ Fit one fibre washer with round hole (3) on each gimbal arm (2).
➤ Lift the range in-between gimbal arms (2) so that the gimbal sideplates will
spring into place on the gimbal arms (2).
➤ With open stovetop fit the fibre washers with oblong holes (4) to the
gimbal arm (2).
Ensure they fit properly on the gimbal arms (2) so they can't rotate.
➤ Fit steel washers (5), screws (6) and tighten.
➤ Adjust the tension of the screws to desired friction.
➤ Place a class B-1 fire extinguisher in reaching distance.
7.4 Installing Origo 6100
NOTICE! Danger of damaging the device!
A
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Make a cutout with the following dimensions (W x H x D):
490 x 530 x 400 mm.
➤ Place the oven into the cutout.
➤ Fix the oven.
➤ Place a class B-1 fire extinguisher in reaching distance.
8 Using the stove
8.1 Filling-in denatured alcohol
WARNING! Danger of injury!
!
Never pour fuel through the burner openings in top of the stove
(fig. 1, page 2).
Overfilling, spilt alcohol and hot objects can cause severe burns.
NOTE
I
If the stove is mounted with gimbals located in down position, the
stovetop must be raised to full upright position in order to remove
the fuel tanks for filling.
16
Dometic ORIGO
EN