Preparing To Charge - Schumacher Electric SE-1-12S Manual Del Usuario

Ocultar thumbs Ver también para SE-1-12S:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2.10
If battery acid contacts your skin or clothing, immediately wash
the area with soap and water. If acid enters your eye, immediately
flood the eye with cold running water for at least 10 minutes and
get medical attention right away.
2.11
If battery acid is accidentally swallowed, drink milk, the whites of
eggs or water. DO NOT induce vomiting. Seek medical attention
immediately.
3.

PREPARiNG TO CHARGE

sure all of the accessories in the vehicle are off to prevent arcing.
3.2
Be sure the area around the battery is well ventilated while the
battery is being charged.
3.3
Clean the battery terminals before charging the battery. During
cleaning, keep airborne corrosion from coming into contact
with your eyes, nose and mouth. Use baking soda and water to
neutralize the battery acid and help eliminate airborne corrosion.
Do not touch your eyes, nose or mouth.
3.4
Add distilled water to each cell until the battery acid reaches the
level specified by the battery manufacturer. Do not overfill. For
a battery without removable cell caps, such as valve regulated
lead acid batteries (VRLA), carefully follow the manufacturer's
recharging instructions.
3.5
Read, understand and follow all instructions for the charger,
battery, vehicle and any equipment used near the battery
and charger. Study all of the battery manufacturer's specific
precautions while charging and recommended rates of charge.
3.6
Determine the voltage of the battery by referring to the vehicle
owner's manual and make sure that the output voltage selector
switch is set to the correct voltage. If the charger has an
adjustable charge rate, charge the battery in the lowest rate first.
3.7
Make sure that the charger cable clips make tight connections.
RiSK OF CONTACT WiTH BATTERY
ACid. BATTERY ACid iS A HiGHLY
CORROSiVE SULFURiC ACid.
3.1
If it is necessary to remove the battery
from the vehicle to charge it, always
remove the grounded terminal first. Make
• 4 •
Tabla de contenido
loading

Este manual también es adecuado para:

Sf-1-12s

Tabla de contenido