Controls And Indicators - Tyco Healthcare AutoSonix Manual Del Operador

The AutoSonix™ ULTRA SHEARS™ 5mm instruments are available in 3 different sizes:
• The STANDARD size is 5 mm in diameter, has a working length of approximately 30 cm, and is intended for introduction and use
through a properly-sized trocar sleeve.
• The SHORT size is 5 mm in diameter, has a working length of approximately 15.7 cm.
• The LONG size is 5 mm in diameter, has a working length of approximately 38 cm, and is intended for introduction and use through a
properly-sized trocar sleeve.
The AutoSonix™ Hook Probes are available in 2 different sizes:
• The SHORT size is 5 mm in diameter, has a working length of approximately 13 cm.
• The LONG size is 5 mm in diameter, has a working length of approximately 35 cm, and is intended for introduction and use through a
properly-sized trocar sleeve.
The AutoSonix™ Ball Probe is available in 1 size:
• The LONG size is 5 mm in diameter, has a working length of approximately 34 cm, and is intended for introduction and use through a
properly-sized trocar sleeve.
• The scallop dial on the ULTRA SHEARS™ instruments rotates the shaft and transducer 360°. The rate of coagulation and dissection can
be controlled manually by selecting the level on the Generator Box and by controlling the tension or pressure on the tissue.

Controls and Indicators

The controls and indicators available to the operator of the AutoSonix™ System are as follows:
Generator: Main Power ON/OFF Switch (on rear panel)
Power On Indicator (LED)
Line Input Voltage Selector Switch (on rear panel)
Ready/Standby Switch
Amplitude Control Knob
Output Level Indicator (digital)
Ultrasound On Indicator Light
Mechanical Limit Indicator Light
Electrical Fault Indicator Light
Footswitch(es): Dual Level Control - Low Voltage Finger Trigger (optional)-Single Level Control
Figure 1: Autosonix™ System
A) BALL PROBE D) AutoSonix™ ULTRASONIC GENERATOR
B) HOOK PROBE E) TRANSDUCER CABLE
C) LIGATOR F) FOOTSWITCH
G)FINGER TRIGGER
H) ADAPTER BOX
I) BACK OF GENERATOR
8