Table - Gaggenau CI 292 600 Manual De Instrucciones

6 Set the desired temperature using the twist knob.
The temperature can be changed by increments of
40° F (5°C) .
7 The element display shows the progress of the
heating process from
with the set temperature. Once the set temperature
has been reached, an audible signal sounds and
the heating indicator goes out. The selected
temperature will then be displayed again.
8 Remove the lid after the signal tone and add the
food. Keep the lid closed during the cooking
process.
Note: When using the fry with a lot of oil function,
do not cover the pot.

Table

The following table provides a selection of dishes and is
sorted according to foods. Temperature and cooking
Meat
Fry with little oil function
Schnitzel plain or breaded
Fillet
Chop*
Cordon bleu, Wiener Schnitzel*
Steak, rare (3 cm thick)
Steak, medium or well-done (3 cm thick)
Breast meat (2 cm thick)*
Sausages, pre-boiled or raw*
Hamburgers, meatballs, filled rolled roast*
Meat loaf
Ragout, gyros
Ground meat
Bacon
* Turn several times
** Heat the oil with a lid. Fry portion by portion without a lid (see the table for the time per portion).
*** Add the food right at the beginning.
¬ ª
to and flashes alternately
You can activate the cooking sensor function via the
wireless temperature sensor. Proceed as follows:
▯
Place the cookware and press the
wireless temperature sensor.
▯
Select the element using the twist knob.
When the function is ready the default temperature of
200° F (95° C) is displayed.
Switching off the ccoking sensor function
You can deactivate this function in a number of ways:
▯
Select the element and touch the
▯
Select the element and set the temperature
the twist knob.
¨
▯
Press the symbol on the wireless cooking
sensor.
A signal sounds and the
element display. The function is deactivated.
time depend on the quantity, condition and quality of the
foods.
Automatic function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
Frying sensor function
¨
symbol on the
¨
symbol.
¨
symbol goes out in the
Heat setting Total cooking time
from the signal
tone (min.)
4 6 - 10
4 6 - 10
3 10 - 15
4 10 - 15
5 6 - 8
4 8 - 12
3 10 - 20
3 8 - 20
3 6 - 30
2 6 - 9
4 7 - 12
4 6 - 10
2 5 - 8
‹
using
29