Tecnotest SL31205 Manual Operativo página 39

______________________________________________________________________ OSCILLOSCOPE KIT
INDEX
GENERAL REGULATIONS FOR OPERATOR SAFETY
When working on engines or other vehicle parts:
When working on batteries remember that:
When working on high voltage equipment:
FOR A CORRECT USE OF THE INSTRUMENT
1.0 - SOFTWARE ENABLING
2.0 - CONNECTIONS
2.1 - Use in SCOPE and VOLTMETER mode
2.2 - Use of the instrument in the AMMETER mode
2.3 - Use of the instrument in the OHMMETER mode
(present only on SL31205/PLUS)
2.4 - Connections for ignitions with distributor - primary
2.5 - Connections for static ignitions - primary
2.6 - Connections for ignitions with distributor - secondary
(present only on SL31205/PLUS)
2.7 - Connections for static ignitions - secondary (present only on SL31205/PLUS)
2.8 - Secondary diagnostics connections in static ignitions without high voltage
cables - spark plug coils (present only on SL31205/PLUS)
3.0 - SCOPE/MULTIMETER
4.0 - SCOPE
4.1 - Time base- Voltage scale Selection
4.2 - Synchronisation of one signal
4.3 - Measure
4.4 - Display of the signal
5.0 - VOLTMETER
6.0 - AMMETER
6.1 - Clip-on ammeter switching on
6.2 - Replacement of the Clip-on Ammeter internal battery
7.0 - OHMMETER (present only on SL31205/PLUS)
8.0 - CALIBRATION (present only on SL31205/PLUS)
9.0 - IGNITIONS DIAGNOSIS
9.1- Primary signal
9.2 - Secondary signal (present only on SL31205/PLUS)
10.0 - SENSORS AND ACTUATORS DIAGNOSIS
11.0 - INDUCTIVE PEAKS
12.0 - ELECTRICAL TRANSIENTS
13.0 - TECHNICAL FEATURES
14.0 - SPARE PARTS
OPERATING INSTRUCTIONS

36
36
37
37
38
39
40
40
40
40
40
41
41
41
41
42
43
46
47
48
49
50
51
51
52
52
53
53
53
54
58
59
60
61
62
35