Pag Poe; Asanetwork; Wifi Configuration; Core Configuration - Bosch ACS 752 Manual

12.4.4

PAG POE

i
This function is to enable the use of both PAG oil
and POE oil (please see chapter 7.5).
!
It is possible to enable this function only on first use
and should never be changed after having used the
station. This is to avoid mixtures that could cause ir-
reversible damage to the A/C system of the vehicle.
i
Once this function has been enabled, if a Charge
function or an Automatic one is started, the station
will automatically wash the hoses, after having se-
lected POE oil, in order not to contaminate the A/C
systems that use POE oil.
1. Call up start screen.
2. Press <MENU>.
3. Press <1> for "Set up".
4. Press <6> for "Activations".
5. Select "PAG POE" with u and o.
6. Enable/Disable with <OK>.

7. Confirm with <ESC>.
12.4.5

ASANETWORK

i
This function must be enabled if you need to use
ASANETWORK.
i
For further information contact Customer Service.
12.4.6

WiFi Configuration

i
This function is used to enable or disable the use of
the WiFi Configuration.
i
For further information contact Customer Service.
12.4.7

CoRe Configuration

i
This function must be enabled if you need to use
CoRe.
i
For further information contact Customer Service.
Robert Bosch GmbH
Additional functions | ACS 752 | 57

13. Additional functions

13.1

Hose flush

i
This function can be used to flush hose lines. This
function is recommend in the following cases, for
example:
$
After the use of UV supplements.
$
If the viscosity or the type of the compressor oil
have been changed.
$
In order to avoid any contamination in the vehicle
air conditioning system.
1. Call up start screen.
2. Press <MENU>.
3. Press <2> for "Functions".
4. Press <1> for "Hose Flush".
5. Follow the messages on screen.
i
Return with <ESC>.
13.2

Pressure test

See chapter 9.2.
13.3

Diagmnose

See chapter 9.3.
13.4

Tank filling

See chapter 7.6.
13.5

Multimedia

Not implemented yet.
13.6

Report management

i
You can export, delete, print and display the data of
the loaded and recovered coolant.
Messages Actions
Export All datas will be saved on a sd card
Cancel Will delete all saved reports on ACS 752
Print Will print all saved reports on ACS 752
Display Will display all saved reports on ACS 752
1. Call up start screen.
2. Press <MENU>.
3. Press <2> for "Functions".
4. Press <6> for "Report management".
5. Select the task you want to start with u and o.
6. Start this task with <OK>.
i
Return with <ESC>.
en
|
S P00 D00 159 2019-03-01