Conductivity Kit; Technical Characteristics; Wire Connection; Operation And Adjustment - BSV BS Pool EVOLINK Serie Manual De Usuario

3.2.6 CONDUCTIVITY Kit

The Conductivity Kit from BSPOOL performs a continuous
measurement of your Swimming pool's water chloride. It is
specially suitable to work with salt water chlorination Systems, and
it will allow to know the salt concentration in the water, and also
the electrolysis cell condition.
This sensor is been designed to work with BSPOOL Systems
exclusively. In order to confirm the compatibility with your
BSPOOL chlorinator model, please, ask to your distributor.

3.2.6.1 Technical characteristics

- Sensor technology: Inductive, with temperature compensation
- Measurement range: 0 to 10g/l
- Resolution: 0,1g/l
- Supply: 12V DC
3.26.2 Installation
3.2.6.2.1 Hydraulic installation
- This sensor must be installed after the filter of the
swimming pool, before the electrolysis cell. The minimum
distance between the sensor and the electrolysis cell is
50cm.
- Install a 1"1/4 flange (not supplied) according with the
pipe diameter where it will be installed.

3.2.6.2.2 Wire connection

Once the conductivity sensor is installed, should be
connected to the electrolysis unit as follows:
Brown wire (Supply): Connect to #14 label.
Green wire (Measure): Connect to #13 label.
White wire (Temperature): Connect to #8 label.
Black wire (GND): Connect to #12 label.

3.2.6.3 Operation and adjustment

Once the conductivity sensor is connected, the chlorinator will detect it
automatically.
83 / 120
Manual EVOLINK v.5