Electrical Connection - BSV BS Pool EVOLINK Serie Manual De Usuario

4) Screw the header cap to the body of the probe. The excess of electrolyte
will leak out across the small hole and the upper part of the cap. Use a cloth
or blotting paper to clean it.
Important: Ensure to fully screw the header cap.
5) Put the silicone ring to its original position, in this way, the small hole will be
sealed again with the silicone ring.

3.2.4.3.3 Electrical connection

Before installing the probe on the probe holder, connect the supplied cable as
follows:
Connect the white cable to the (+) input, it has a red or blue
-
dot sticker in the right side of the connector.
Connect the dark cable to the (-) input.
-
Once the connection is done, screw the cap and the cable
-
gland.
Manual EVOLINK v.5
80 / 120