Information Menu - BSV BS Pool EVOLINK Serie Manual De Usuario

- The acid tank is empty and therefore pH corrector is not being injected
into the swimming pool.
- The pH probe is dirty or worn, and cannot read the real value correctly.
However, it could happen when starting up the equipment for the first time, is
the real pH of the water is a long way from the set value. The alarm can be
disabled if it is calculated that the pump needs to work continuously for several
hours to correct the pH. However it is recommended to enable the alarm once
set values are reached.
Get into Configuration Menu.
Activated: pH Alarm = ON.
Deactivate: pH Alarm = OFF.
4.1.4.9- Radio Channel
There is an option to change Radio channel if there is any undesirable
interference. Go to MORE in Configuration Menu. Select any other channel
available of the list by pressing next to WIRELESS on CHANNEL. Click OK to
finish.
Note: Be aware, radio channel must match in both devices. EVOLINK and
DOMOPOOLS.

4.1.4.10- Information Menu

This menu contains information about chlorinator model, software version and
clean button to force the cell into a cleaning cycle. It is not recommended to
use is button, only with under technical instructions.
Manual EVOLINK v.5
102 / 120