GB
3. Remove thrust collar (3), washer (4) and short
spacer sleeve (5) from the spindle.
4. Remove the blades (6) and the long spacer
sleeves one after another.
Assembly is carried out in reverse order.
Care of the engine
Air filter
Spark plug
Oil change
Drain used oil when the motor is warm.
ADVICE
Warm oil drains quickly and completely.
1. To collect oil, place a suitable container under
the engine.
2. Remove the oil dipstick.
3. Screw in the filler neck.
4. Push the beam downwards and tilt the equip-
ment, until the beam touches the floor. Drain
the oil completely.
5. Pull the equipment up and fill with oil (SAE
10W-30, quantity: 0,25l)
6. Remove the filler neck.
7. Screw in the oil dipstick.
TROUBLESHOOTING
Problem
Engine does not start
Drum does not rotate
Engine output drops off
Poor scarifier performance
14
Dispose of used engine oil in a manner
ADVICE
that is compatible with the environment!
We recommend to collect the used oil in
a closed container and to deliver it to a
suitable recycling or service station.
Used oil should not be
Observe the operating instructions supplied by
the engine manufacturer.
Storage
NOTICE!
Do not store motor near open flames or
heating sources - Burn and/or explosion
danger!
Let the engine cool down.
Store the scarifier in a dry place.
To save storage space, unscrew the butterfly
nuts on the beam and fold it in.
DISPOSAL
Do not dispose of old equipment, bat-
teriesor accumulators as household
waste!
Packaging, machine and accessories are
manufactured using recyclable materials
and must be disposed of accordingly.
Solution
Top up fuel
Press engine switch bar to upper beam
Check spark plug, re-new if necessary
Clean air filter
Call customer service workshop
Choose lower working depth
Change worn blades
Mow lawn (grass too high)
Choose lower working depth
Change worn blades
disposed of with domestic rubbish
poured into the sewage water sys-
tem or drain pipes
poured on the ground
Combi Care 38P Comfort
Petrol scarifier