Tabla de contenido
MIDI implementada
Model: VK-77 (Combo Organ)
Date: Sep. 28 1998
Version: 1.00
1. Recognized Receive Data
*
The VK-77 has two MIDI IN connectors: MIDI IN and PEDAL KEYBOARD IN. Messages that are
input from PEDAL KEYBOARD IN will be received as messages for the pedal part, regardless of
their channel number.
*
Messages for the system or for the entire organ voice will be received on the channel specified by
Control MIDI Channel (SYSTEM MIDI MENU -> Control MIDI Ch.).
*
Messages for the organ upper/lower/pedal part will be received on the each channels specified by
Organ MIDI Channel (SYSTEM MIDI MENU -> Organ MIDI Ch.).
*
Messages for the orchestral upper/lower/pedal part will be received on the each channels
specified by Orchestral MIDI Channel (SYSTEM MIDI MENU -> Orch MIDI Ch.).
*
Following messages are not received if the "Rx" of Organ Voice & Orchestral Voice MIDI
Transmit/MIDI Receive Switch (SYSTEM MIDI MENU -> Org&Orch MIDI) is Off.
*
The VK-77's MIDI channels is defined as follows at the factory settings.
Control MIDI Channel ... 1
Organ Voices
Upper Part ... 1
Orchestral Voices
Upper Part ... 4
External
Upper Part ... 7
[ORGAN]
It means the message that can receive the each part of the Organ Voices.
[ORCH]
It means the message that can receive the each part of the Orchestral Voices.
[CTRL]
It means the message that can receive the MIDI channel specified by
Control MIDI Channel.
[PEDAL]
It means the message that can receive from the PEDAL KEYBOARD IN
Connector.
Channel Voice Message
Note Off [ORGAN] [ORCH] [PEDAL]
Status
2nd byte
8nH
kkH
9nH
kkH
n =MIDI Channel Number:
kk =note number:
vv =note off velocity:
Note On [ORGAN] [ORCH] [PEDAL]
Status
2nd byte
9nH
kkH
n =MIDI Channel Number:
kk =note number:
vv =note on velocity:
Control Change
Modulation (Controller number 1) [ORCH]
Status
2nd byte
BnH
01H
n =MIDI Channel Number:
vv =modulation depth:
Data Entry (Controller number 6, 38)
Status
2nd byte
BnH
06H
BnH
26H
n =MIDI Channel Number:
mm =upper byte (MSB) of parameter number specified by RPN
ll =lower byte (LSB) of parameter number specified by RPN
Volume (Controller number 7) [CTRL] [ORCH]
Status
2nd byte
BnH
07H
n =MIDI Channel Number:
vv =Volume:
*
This messages can control the volume of the entire organ voice when it is received in the channel
which was specified by Control MIDI Channel (SYSTEM MIDI MENU -> Control MIDI Ch). But it
can not control organ upper/lower/pedal part separately.
Lower Part ... 3
Pedal Part ... 2
Lower Part ... 5
Pedal Part ... 6
Lower Part ... 8
Pedal Part ... 9
3rd byte
vvH
00H
0H–FH (ch.1–ch.16)
00H–7FH (0–127)
00H–7FH (0–127)
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127)
01H–7FH (1–127)
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127)
3rd byte
mmH
llH
0H–FH (ch.1–ch.16)
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127) Initial value is "64H" (100)
*
This messages can control the volume of the each part of the orchestral voices when it is received
in the channel which was specified by Orchestral MIDI Channel (SYSTEM MIDI MENU -> Orch
MIDI Ch).
Expression (Controller number 11) [CTRL] [ORCH] [PEDAL]
Status
2nd byte
BnH
0BH
n =MIDI Channel Number:
vv =expression:
*
It can be used independently from Volume messages. Expression messages are used for musical
expression within a performance; e.g., expression pedal movements, crescendo and decrescendo.
*
This messages can control the volume of the entire organ voice when it is received in the channel
which was specified by Control MIDI Channel (SYSTEM MIDI MENU -> Control MIDI Ch). But it
can not control organ upper/lower/pedal part separately.
*
This messages can control the volume of the each part of the orchestral voices when it is received
in the channel which was specified by Orchestral MIDI Channel (SYSTEM MIDI MENU -> Orch
MIDI Ch).
*
Data received from PEDAL KEYBOARD IN will be handled in the same way as the EXPRESSION
PEDAL jack of the VK-77 itself.
General Purpose Controller 1 (Controller number 16) (Orchestral Glide)
[ORCH]
Status
2nd byte
BnH
10H
n =MIDI Channel Number:
vv =control value:
General Purpose Controller 2 (Controller number 17) (Wheel Brake)
[CTRL]
Status
2nd byte
BnH
11H
n =MIDI Channel Number:
vv =control value:
General Purpose Controller 3 (Controller number 18)
Status
2nd byte
BnH
12H
n =MIDI Channel Number:0H–FH (ch.1–ch.16)
*
The function will depend on the jack.
a) MIDI IN (Overdrive) [CTRL]
vv =control value:
00H–7FH (0–127)
b) PEDAL KEYBOARD IN (PK Foot Switch L) [PEDAL]
vv =control value:
00H–7FH (0–127) 0–63 = OFF, 64–127 = ON
*
The function can be assigned by Foot Switch-L Assign (SYSTEM BASIC menu -> PK Foot L
Assign).
General Purpose Controller 4 (Controller number 19)
Status
2nd byte
BnH
13H
n =MIDI Channel Number:0H–FH (ch.1–ch.16)
*
The function will depend on the jack.
a) MIDI IN (Ring Modulator Frequency) [CTRL]
vv =control value: 00H–7FH (0–127)
b) PEDAL KEYBOARD IN (PK Foot Switch R) [PEDAL]
vv =control value:
00H–7FH (0–127) 0–63 = OFF, 64–127 = ON
*
The function can be assigned by Foot Switch-R Assign (SYSTEM BASIC menu -> PK Foot R
Assign).
Hold 1 (Controller number 64) [ORGAN] [ORCH] [PEDAL]
Status
2nd byte
BnH
40H
n =MIDI Channel Number:
vv =control value:
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127) Initial value is "7FH" (127)
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127) 0–63 = OFF, 64–127 = ON
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127) 0–63 = SPIN, 64–127 = BRAKE
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
0H–FH (ch.1–ch.16)
00H–7FH (0–127) 0–63 = OFF, 64–127 = ON
99
Tabla de contenido
