Stihl FS 510 C-M Manual De Instrucciones página 21

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

5
Use the spring (5) from the parts kit
N
supplied with the machine.
Push the spring (5) into the lower
N
clamp molding (6).
4
7
Position the clamp moldings (4) with
N
handlebar (2) on the handle support
(7).
Do notturn the handlebar in the
N
clamp moldings.
FS 510 C-M, FS 560 C-M
Raise the grip of the wing screw (8)
N
to the upright position.
Rotate the wing screw
N
counterclockwise and tighten it only
moderately.
8
2
Position wing screw (8) in threaded
N
insert in handle support (7) – against
pressure of spring (5).
Position the clamp moldings so that
N
the tabs (9) on the lower clamp
molding (6) line up with the slots
(10) in the handle support (7).
8
N
5
7
N
N
6
9
7
10
N
6
7
Rotate wing screw clockwise until
the lower clamp molding (6) butts
against the handle support (7).
2
Swing the handebar (2) forwards
through 180°.
Only tighten the wing screw
moderately.
Fold the grip of the wing screw down
so that it is flush.
English
19

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fs 560 c-mFs 510 c-m

Tabla de contenido