Stihl FS 510 C-M Manual De Instrucciones página 25

5
4
Remove dirt from joints on gearbox
N
and defelector – make sure that no
dirt gets into the screw holes in the
gearbox.
Place the deflector on the
N
gearbox (4).
Insert the screws (5) and tighten
N
them down firmly.
Fitting the grass shield
A grass shield is mounted to the gearbox
when using mowing heads and grass
cutting blades. It greatly reduces the
amount of grass, plant residue, etc. that
wraps itself around the gearbox and
cutting attachment.
Machines which have a mowing head or
grass cutting blade as original
equipment are supplied with a grass
shield. A "grass shield kit" is available as
a special accessory for retrofitting to
machines.
FS 510 C-M, FS 560 C-M
Install the grass shield before
N
mounting the deflector – if
necessary, remove the deflector
that is already fitted on the gearbox.
1
2
3
Hold the gearbox so that the
N
shaft (1) faces up.
Place the grass shield (2) on the
N
gearbox so that the middle hole is in
line with the rib (3).
5
2
4
Hold one of the three retainers (4)
N
against the gearbox and grass
shield so that the hole in the retainer
lines up with the middle hole.
Insert the screw (5) in the retainer
N
and tighten it down only moderately
so that the grass shield (2) can still
be rotated on the gearbox.
4
Fit the other two retainers (4) on the
N
gearbox and tighten down the
screws only moderately.
Align the grass shield so that the
N
center of the front retainer is in line
with the rib on the gearbox.
Tighten down the screws firmly.
N
5
1
Fit the 2.4-in (60-mm) diameter
N
thrust plate (5) on the shaft (1).
NOTICE
Only use the 2.4-in (60-mm) diameter
thrust plate. The 2.6-in (65-mm)
diameter thrust plate is too big and must
English
23