Assembly / Bringing into use / Maintenance and cleaning / Service / Warranty
C heck that the tool is firmly seated.
Incorrectly or insecurely attached tools could
become lose during use and injure you.
Place a sanding sheet
Q
on the backing plate
O ffer up the sanding sheet
one side of the backing plate
the sanding sheet to the backing plate.
Bringing into use
Q
Switching on / off
Q
S lide the ON / OFF switch
switch on the device.
S lide the ON / OFF switch
switch off the device.
Selecting the oscillation speed
Q
P reselect the required oscillation speed using
the oscillation speed setting wheel
NoTE: The required oscillation speed depends on
the material and the working conditions and can
be determined by means of a practical test.
Maintenance and cleaning
Q
DANGER oF INJURY! Pull
the mains plug out of the mains socket
before you carry out any task on the
electrical power tool.
D o not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
C lean the device frequently; for best results, do
this immediately after you have finished using it.
U se a dry cloth to clean the housing – under
no circumstances use petrol, solvents or clean-
ing agents that attack plastic.
A vacuum cleaner is required to thoroughly
clean the device.
42 GB/MT
Q
to fit flushly on
12
, then apply
7
forwards to
1
Q
backwards to
1
The warranty for this appliance is for 3
years from the date of purchase. The ap
pliance has been manufactured with care
and meticulously examined before deliv
ery. Please retain your receipt as proof of
purchase. In the event of a warranty claim,
.
2
please make contact by telephone with our
Service Department. only in this way can a
postfree despatch for your goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
V entilation openings must always be kept free.
R emove any adhering dust with a narrow paint
brush.
Service
Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu
facturer or its service centre. This will
ensure that your device remains safe to use.
Warranty