Fitting The Sanding Sheet Onto The Sanding Plate; Operation; Switching On And Off; Selecting Oscillation Speed - Parkside PMFW 310 D2 Traducción Del Manual De Instrucciones Original

Fitting the sanding sheet onto the
sanding plate
Attaching:
♦ Sanding sheets are attached to the sanding
pad by means of the hook and pile fastening .
NOTE
► Before fitting a new sanding sheet
any dust and dirt from the sanding pad
► Note that the holes for dust extraction from
sanding sheet and sanding pad
aligned .
♦ Position the sanding sheet
of the sanding pad
sheet on the sanding plate .

Operation

Switching on and off

Switching on:
♦ Push the ON/OFF switch
the appliance on .
Switching off:
♦ Push the ON/OFF switch
switch the appliance off .

Selecting oscillation speed

♦ Use the speed adjustment wheel
required oscillation speed .
Level 1: low speed
Level 6: high speed
NOTE
► The required speed depends on the material
being worked and on the working conditions
and can be determined through practical
tests .
■ 44 │ GB │ MT
, remove
.
are
flush on one side
, then place the sanding
forwards to switch
backwards to
to set the

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always remove the plug from the
power socket before working on the
power tool.
■ Do not use any sharp objects to clean the ap-
pliance . Do not allow any liquids to get into the
appliance . This can damage the appliance .
■ Clean the appliance regularly, preferably
immediately after completion of the work .
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic .
■ A vacuum cleaner is required for thorough
cleaning of the appliance .
■ Ventilation openings must never be obstructed .
■ Remove any adhering grinding dust with a
brush .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches and replacement batteries)
can be ordered via our service hotline .
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase . If this product has any faults,
you, the buyer, have certain statutory rights . Your
statutory rights are not restricted in any way by the
warranty described below .
Warranty conditions
The validity period of the warranty starts from the
date of purchase . Please keep your original receipt
in a safe place . This document will be required as
proof of purchase .
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion . This warranty service is depend-
ent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence .
PMFW 310 D2