Crane 53077 Manual Del Usuario página 10

6. BOTTOM GUIDE ROPE SET UP:
Make the loops on the Bottom Guide Rope tension clips large enough to slip over
the stakes already in the ground. Make sure that the Guide Rope loops are placed
under the stake hooks as shown in FIG. 6.
FIG. 6
Ground
Stake
Hook
Loop
Ground
Stakes
TIP: After the net is assembled, you can
adjust the pole tension by sliding the
tension clips up or down along the
guide ropes.
10
Top Guide
Rope
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Bottom Guide
Rope
7
6
TIP: After the net is completely
assembled and the pole tension is
correct, the net can be tightened by
adjusting the Net Tension Device (#6).
Assembly