Before Initial Use; Energy Saving Tips; Locking The Cooling Device; Connecting The Cooling Device - Dometic CF Serie Instrucciones De Uso

CoolFreeze
The cooling device is equipped with an LED interior light that remains on when the
voltage is applied. The energy consumption of the LED interior light is extremely low
and is negligible compared to the total energy consumption of the device.
6.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter "Cleaning and maintenance" on page 17).
6.2

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the lid open for longer than necessary.
• Defrost the cooling device as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
6.3

Locking the cooling device

➤ Close the lid.
➤ Press the latch (fig. 4 or fig. 5 1, page 4) down, until it latches in
place audibly.
6.4

Connecting the cooling device

The cooler can be operated with
12 Vg or 24 Vg or 100 – 240 Vw.
A
NOTICE! Danger of Damage!
• Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
• Overvoltage can damage the electronics of the device.
➤ Place the cooler on a firm base.
Make sure that the ventilation slots are not covered and that the heated air can be
dissipated.
EN
Operation
11