Scan; Deleting A Nuisance Scan Channel - Motorola EP350 Guía Del Usuario De Radio

SCAN

Scan allows you to monitor multiple channels and receive calls
that are transmitted on them.
Two types of scan are supported: Normal Scan and Priority
Scan. Normal Scan searches all channels sequentially in the
radio's scan list, whereas Priority Scan allocates 50% of the
scanning time to the Priority Channel (the first channel in the
designated scan list).
Start
Ch. 2 Ch. 3
Normal Scan
Ch. 1
Home Ch. 16
Start
Ch. 2 Ch. 1
Priority Scan
Ch. 1
Channel 1 Prioritized
Home Ch. 1
During scan, when activity is detected that meets the
unsquelch condition, the radio stops scanning and switches to
that channel. When no activity is detected for a pre-set time,
the radio resumes scanning.
Ch. 4
Ch. 14
Ch. 15
Ch. 3
Ch. 1
Ch. 16
If your radio has switched to a non-priority channel during
priority scan, it still checks for activity on the priority channel. If
activity is detected there, the radio switches to the priority
channel.
The radio transmits on the Home Channel, if PTT is pressed
during scanning. If the radio stops scanning, and changes to a
particular channel, all transmit and receive activities are
performed on that channel.
• Press the Scan button to begin channel scanning. The
blinking amber LED indicates that the radio is scanning.
The LCD screen shows the Home Channel where the
scan began.
• Press Scan button to stop scanning.

Deleting a Nuisance Scan Channel

A channel with unwanted activity is called a Nuisance
Channel. You can remove a Nuisance Channel from the scan
list temporarily. To remove a Nuisance Channel:
•
Press the Nuisance Channel Delete programmable
button, when your radio stops on a Nuisance Channel. A
high-pitched tone is heard
You cannot remove the Home or Priority Channel from the
scan list. If attempted, a low-pitched tone is heard, and no
action is taken.
To reinstate the deleted channel(s) into the scan list, restart
scan, or simply turn off your radio and turn it on again.
.
11
English
English