Disposal Information - Bosch BSG8 Serie Instrucciones De Uso

en

Disposal information

Packaging
The packaging is designed to protect the
vacuum cleaner from being damaged
during transportation.
It is made of environment-friendly materials
and can be recycled.
Dispose of packaging that is no longer
required at an appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners contain many
recyclable materials.
Therefore, please take used vacuum
cleaners to your retailer or recycling centre
so that they can be recycled.
For current disposal methods, please
enquire at your appliance dealership or
local council.
Please note
!
Only connect the appliance to a socket
that is protected by at least a 16 amp fuse.
If a fuse should be tripped when you
switch on the vacuum cleaner, this may be
because other electrical appliances which
have a high current draw are connected to
the same power circuit.
To prevent the fuse from tripping, select the
lowest power setting before switching the
vacuum cleaner on, and increase the
power only once it is running.
10
Fold out picture pages.
Setting up
1
Figure
a) Push the hose connector into the opening
on the vacuum cleaner until it engages.
b)To remove the flexible hose, press the two
lugs together and pull the tube out.
2*
Figure
a) Connect the handle and the telescopic
tube together.
b)Push the handle into the telescopic tube
until it engages.
To release the connection, squeeze the
collar sleeve and pull the handle out.
3*
Figure
Attach the carpet lifter to the nozzle.
Press the carpet lifter sideways to engage.
4*
Figure
a) Connect the floor tool and the telescopic
tube together.
b)Push the telescopic tube into the
connecting piece of the floor tool until it
engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
5*
Figure
To adjust the length of the telescopic tube,
press the adjusting button/adjusting sleeve
in the direction of the arrow and adjust the
tube to the required length.