Bosch BSG8 Serie Instrucciones De Uso página 7

Fold out picture pages.
Setting up
Figure
1
a) Insert the flexible hose adapter into
the air intake opening and allow it to
engage.
b) To remove the flexible hose, press the
two lugs together and pull the tube
out.
Figure
2*
a) Align and connect the handle and the
telescopic tube.
b) Push the handle straight into the tele-
scopic tube until it engages.
To release the connection, squeeze
the collar sleeve and pull the handle
out.
Figure
3*
a) Connect the floor nozzle and the tele
scopic tube together.
b)Push the telescopic tube straight into
the connecting piece of the floor tool
until it engages.
To release the connection, squeeze
the locking collar and pull the tele-
scopic tube out.
Figure
4*
To adjust the length of the telescopic
tube, press the adjusting
button/adjusting sleeve in the direc-
tion of the arrow and adjust the tube
to the required length.
Figure
5
Holding the power cord by the plug,
pull out the required length and plug
the plug into the mains socket.
Figure
6
To switch your vacuum cleaner on and
off, press the On/Off button in the direc-
tion of the arrow.
Vacuuming
You have bought an extremely powerful
device. The highest suction setting is
therefore only recommended for heavily
soiled, short-pile carpets and hard
floors.
Figure
7
The required suction power can be select-
ed by adjusting the suction regulator.
Low
suction range:
For vacuuming delicate fabrics, e.g.
curtains.
Moderate
suction range:
For daily vacuuming of lightly soiled
floors.
High
suction range:
For vacuuming durable floor cover-
ings, hard floors and for heavily soiled
surfaces.
Turbo range:
For vacuuming stubborn dirt and very
heavily soiled surfaces.
en
5