VQ OrthoCare BioniCare Manual De Instrucciones página 13

Center the small round area of the electrode
over the patella, and gently press the knee
electrode to the knee while keeping the
thigh portion of the wrap away from the
leg (2b). While grasping the top edge of the
wrap, gently tension it, and then adhere the
thigh electrode to the skin.
Wrap the straps around the leg and secure
hook tabs to the wrap (2c, 2d). Straps may
be trimmed as needed. Best performance is
achieved when the lower strap crosses over
the patella, wrapping the patella in two
layers.
STEP 3. Connecting the Device:
The lead wire connects the BioniCare Generator to the knee and thigh
electrodes. The single end of the Wire inserts into the female connector
on the generator and the other end divides into two ends with color-coded
tips. See Figure 1 and 2, to attach this Wire:
1. Connect the two color coded lead wire ends to the electrode wires.
Make sure the BioniCare Generator is turned off. Attach red (knee)
electrode to the red lead wire tip and the black (thigh) electrode to the
black lead wire tip.
2. Now connect the single lead wire end to the BioniCare Generator as
seen in figures 1 and 2.
Figure 1
BioniCare Knee System
®
LEAD WIRE
LEAD WIRE
Figure 2
2c
2d
ENGLISH | 11