VQ OrthoCare BioniCare Manual De Instrucciones página 10

Ocultar thumbs Ver también para BioniCare:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BioniCare
Knee System
®
Preparation and Treatment (cont.)
Apply thigh electrode to thigh liner. Peel
the white backing from the thigh electrode
(2a). Adhere electrode to the thigh liner,
centering it in the outlined area. Make sure
that the wire extends toward the top of the
liner. The white side of the electrode should
be against brace or liner and black side
goes against the skin.*
Peel clear plastic gel backing (2b). Keep
plastic backing for protection of electrode
when not in use.
Apply Brace to leg, as detailed in brace
application instructions.Leave knee wrap
unattached (see OActive 2 application
instructions).
STEP 3. Apply knee electrode. Peel clear
plastic backing from knee electrode. With
knee at 45°, adhere electrode to knee by
first placing center section over kneecap
with wire extending down as shown.
Center the round area in the middle of the
electrode over the kneecap (3). Then press
entire electrode firmly to skin. Peel white
backing off electrode. The white side of the
electrode should be against brace or liner
and black side goes against the skin.*
STEP 4. Apply knee wrap around the knee
and secure in front with velcro tab (4). Make
sure to route wire upward towards thigh.
*For demonstration purposes, electrodes are shown here in a contrasting color.
8
2a
2b
3
4
Tabla de contenido
loading

Este manual también es adecuado para:

Bionicare knee system

Tabla de contenido