VQ OrthoCare BioniCare Manual De Instrucciones página 11

BioniCare with Catalyst
STEP 1. Attach knee wrap to brace (1a).
Front side of the knee wrap has a tag on it.
With front of brace and knee wrap facing
toward you, place one loop of knee wrap
over the plastic condyle cup on the brace
as shown (1b).
Pull knee wrap around back of brace, then
around the outside of the other hinge. Secure
the remaining loop around the plastic condyle
cup. Wrap will be stretched across back of
knee brace (placing knee in brace will push
it forward)(1c).
NOTE: Tag side should be facing the front
of the brace.
STEP 2. Replace thigh liners with BioniCare
liner. Install BioniCare liner in the same
position as the original side-liners with the
thigh cuff covered as shown (2). The softer
protruding area on the liner should face
toward the skin.
STEP 3. Install thigh electrode. Remove
white backing from the thigh electrode.
Adhere electrode to the thigh liner, centering
as shown (3). Electrode wire should top of
the brace. The white side of the electrode
should be against brace or liner and black
side goes against the skin.*
STEP 4. Install knee electrode. Temporarily
place the brace on the leg backwards with
center of knee wrap over center of the kneecap.
Hinges should sit on the sides of the knee.
Remove white backing from knee electrode
and adhere it to knee wrap as shown with
wire extending downward. Center the round
area in the middle of the electrode over the
kneecap (4). The white side of the electrode
should be against brace or liner and black
side goes against the skin.*
*For demonstration purposes, electrodes are shown here in a contrasting color.
BioniCare
Propel OA Application:
•
Knee System
®
FRONT
ENGLISH | 9
1a
1b
1c
2
3
4