VQ OrthoCare BioniCare Manual De Instrucciones página 12

BioniCare Knee System
®
Preparation and Treatment (cont.)
STEP 5. Apply the brace (See application
instructions for Catalyst
Remove the clear backing from both
electrodes. With the knee bent at 45
degrees, gently push the knee wrap over
the knee to create a "reverse bubble"(5).
Be sure the center of the knee wrap and
center round part of the electrode are directly over the center of the
kneecap. Fasten straps in numerical order and continue applying the
brace per the Catalyst•Propel OA application instructions.
BioniCare Night-Wrap Application Guide:
STEP 1. Install electrodes on the BioniCare
Night-Wrap. Lay the Night-Wrap on the leg
with the longer strap closer to the waist, and
so that the graphics of the wrap are visible.
Ensure that the kneecap (patella) is centered
beneath the patella marking.
Apply the thigh electrode by peeling off the
white paper backing and adhering the elec-
trode to the wrap within the markings. The
wire should extend up toward the waist.
The white side of the electrode should be
against the wrap and black side goes on the
skin.*
Apply knee electrode by peeling off the
white paper backing (1a) and adhering the
electrode to the wrap within the markings
as pictured (1b). The wire should extend
downward. The white side of the electrode
should be against the wrap and black side
goes on the skin.*
STEP 2. Apply the BioniCare Night-Wrap.
Remove the clear backing from both elec-
trodes (2a). Position the wrap so that the
electrodes are facing leg (keep long strap
closer to the waist).
*For demonstration purposes, electrodes are shown here in a contrasting color.
10
Propel OA).
•
KNEE
SIDE VIEW
CALF
5
1a
1b
2a
2b