Changing Volume Presettings (Volume Menu); Changing The Presetting Of The Power-On Volume (On Volume/ Last Volume); Changing Volume Presettings For Phone And Mute - Blaupunkt Hamburg MP57 Instrucciones De Manejo E Instalación

Changing volume presettings
(VOLUME MENU)
The following presettings can be changed in
the Volume menu:
•
Power-on volume (ON VOLUME)
•
Volume presettings of phone/navigation
announcement (TEL VOLUME) and vol-
ume reduction (MUTE LEVEL)
•
Signal tone (BEEP ON/OFF)
•
Speed-dependent volume increase
(AUTO SOUND)
VOLUME MENU
USER MENU
To call up the "VOLUME" menu:
Press the MENU/OK button
u
Press the rocker switch
u
peatedly until "VOLUME MENU" appears
on the display.
Press the rocker switch
u
the menu.
The Volume menu appears.
Changing the presetting of the power-on
volume (ON VOLUME /LAST VOLUME )
The device is factory set to play the previ-
ously used volume after switch-on (but not
to exceed the value 38). You can change the
power-on volume.
In the Volume menu, press the rocker
u
=
switch or
VOLUME" is displayed.
Press the rocker switch
u
the menu.
?
.
=
or re-
:
to open
repeatedly until "ON
:
to open
Switch between the settings with the
u
rocker switch or
•
"LAST VOLUME" (power-on volume
same as switch-off) or
•
"ON VOLUME" (presetting the pow-
er-on volume)
If you selected "ON VOLUME":
Adjust the desired volume with the rock-
u
er switch or
Changing volume presettings for phone
and mute
If the device switches a phone call or naviga-
tion announcement, it always starts with the
volume preset here.
In addition, you can assign a lower volume
up to the value 0 (mute) to the volume re-
duction (mute).
In the Volume menu, press the rocker
u
=
switch or
menu items are displayed:
•
"MUTE LEVEL ": Presetting the volume
of the volume reduction
•
"TEL VOLUME ": Presetting the vol-
ume of the phone call/navigation an-
nouncement
Press the rocker switch
u
the setting.
Adjust the desired volume with the rock-
u
er switch or
Notes:
The volume preset by you will not be
used,
•
if the volume currently listened to is
lower than the set mute level. In this
User settings
:
.
=
(levels 0 to 66).
repeatedly until these
:
to display
=
(levels 0 to 66).
47