Measuring Volume - Powerfix Profi HG03064A Instrucciones De Utilización Y De Seguridad

 
A lign the product and press the READ button
again. If the measurement is successful, the
width appears at the top of the display, and
at the bottom appears the surface area in the
m unit of measurement (or sq.ft = square feet).
2
 
P ress the MODE button briefly, if a further
surface area measurement is required. The
figures in the display are reset, and the product
is ready for a new surface area measurement.

Measuring volume


Note: In order to avoid errors in the measuring
method, please familiarize yourself first with the
information about measuring lengths.
 
P ress the ON / OFF button
product on.
 
P ress the MODE button
the symbol "
well as the designation 0.00m (or 0'00"),
appear in the display
for length measurement flashes. The product
displays in this way, that it is ready for the first
measurement.
 
A lign the product and press the READ button
If the measurement is successful, the length
will appear at the top of the display. The sym-
bol for width measurement "
flashes. The product displays in this way, that
it is ready for the measurement of the width.
 
A lign the product and press the READ button.
If the measurement is successful, the width
will appear at the top of the display. The
symbol for height measurement "
flashes. The product displays in this way, that
it is ready for the measurement of the height.
32 GB/IE
9
repeatedly until
8
" for volume measurement, as
. The symbol "
10
to switch the
"
4
" also
" also
.