Measuring Surface Area - Powerfix Profi HG03064A Instrucciones De Utilización Y De Seguridad

 
P ress the RECALL button. The measured value
is then transferred to the aggregate memory,
and the aggregate of the two measured
lengths appears at the bottom of the display.
If the measurement is an incorrect measure-
ment, do not press the RECALL button but
press the READ button again. The measured
value, which is displayed at the top, is over-
written. Press the RECALL button to adopt the
value into the aggregate memory.
 
Y ou can repeat this procedure as often as
you wish, as long as the length of 9999.99 m
is not exceeded.

Measuring surface area


Note: In order to avoid errors in the measuring
method, please familiarize yourself first with the
information about measuring lengths.
 
P ress the ON/OFF button
product on.
 
P ress the MODE button
the symbol for surface area measurement
" ", as well as the designation 0.00 m
(or 0'00"), appear in the display
symbol "
The product displays in this way, that it is
ready for the first measurement.
 
A lign the product and press the READ button
If the measurement is successful, the length will
appear at the top of the display. The symbol
for width measurement "
The product displays in this way, that it is
ready for the measurement of the width.
" for length measurement flashes.
to switch the
9
repeatedly until
8
. The
10
" also flashes.
GB/IE
.
4
31