Measuring Volume - Powerfix Profi 278296 Instrucciones De Utilización Y De Seguridad

 
P ress the MODE button
the symbol for surface area measurement
„ ", as well as the designation 0.00 m
(or 0'00"), appear in the display
symbol „
The device displays in this way, that it is
ready for the first measurement.
 
A lign the device and press the READ button
If the measurement is successful, the length will
appear at the top of the display. The symbol
for width measurement „
The device displays in this way, that it is ready
for the measurement of the width.
 
A lign the device and press the READ button
again. If the measurement is successful, the
width appears at the top of the display, and
at the bottom appears the surface area in the
m unit of measurement (or sq.ft = square feet).
2
 
P ress the MODE button briefly, if a further
surface area measurement is required. The
figures in the display are reset, and the device
is ready for a new surface area measurement.

Measuring volume


Note: In order to avoid errors in the measuring
method, please familiarize yourself first with the
information about measuring lengths.
 
P ress the ON / OFF button
device on.
 
P ress the MODE button
the symbol „
well as the designation 0.00m (or 0'00"),
appear in the display
for length measurement flashes. The device
" for length measurement flashes.
" for volume measurement, as
10
repeatedly until
8
. The
10
" also flashes.
to switch the
9
repeatedly until
8
. The symbol „
GB/IE
.
4
"
29