Pioneer DEH-6250BT Manual De Instrucciones página 15

Operating this unit
1 Press and hold PHONE/
display the connection menu.
# You cannot operate this step during a call.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Device list (connecting or disconnecting a cellular
phone from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to connect/disconnect.
3 Press M.C. to connect/disconnect the selected
cellular phone.
If the connection is established, * is indicated on
the device name.
Delete device (deleting a cellular phone from the de-
vice list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to delete.
! Press and hold M.C. to switch the BD address
and device name.
3 Press M.C. to display Delete YES.
4 Press M.C. to delete a cellular phone information
from the device list.
! While this function is in use, do not turn off the
engine.
Add device (connecting a new cellular phone)
/CONNECT to
1 Press M.C. to start searching.
! To cancel, press M.C. while searching.
2 Turn M.C. to select a device from the device list.
! If the desired device is not displayed, select
3 Press and hold M.C. to switch the BD address
and device name.
4 Press M.C. to connect the selected cellular
phone.
! To complete the connection, check the device
! PIN code is set to 0000 as the default. You
! If five devices are already paired, Memory full
SPCL. Device (setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your Blue-
tooth device is listed as a special device, select the
appropriate one.
1 Press M.C. to display the setting mode.
2 Use M.C. to select a special device.
Turn to change the menu option. Press to select.
! If five devices are already paired, Memory full
3 Turn M.C. to display this unit's device name, BD
address and pincode.
4 Use a cellular phone to connect to this unit.
! PIN code is set to 0000 as the default. You
! To complete the connection, check the device
Auto CONN (connecting to a Bluetooth device auto-
matically)
1 Press M.C. to turn automatic connection on or
off.
Visible (setting the visibility of this unit)
Black plate (15,1)
Search again.
name (DEH-6250BT) and enter the link code
on your cellular phone.
can change this code. Refer to PIN code (PIN
code input) on this page.
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
can change this code. Refer to PIN code (PIN
code input) on this page.
name (DEH-6250BT) and enter the link code
on your cellular phone.
<YRD5316-B/S>15
Section
02
15
En