SPARKY M 750 HD Instrucciones De Uso página 9

b) Never place your hand near the rotating
accessory. Accessory may kickback over
c) Do not position your body in the area
where power tool will move if kickback
occurs. Kickback will propel the tool in di-
rection opposite to the wheel's movement
d) Use special care when working corners,
sharp edges etc. Avoid bouncing and
snagging the accessory. Corners, sharp
edges or bouncing have a tendency to
snag the rotating accessory and cause loss
e) Do not attach a saw chain woodcarving
blade or toothed saw blade. Such blades
create frequent kickback and loss of con-
other appropriate way.
and Abrasive Cutting-Off Operations:
a) Use only wheel types that are recom-
mended for your power tool and the
wheel. Wheels for which the power tool
was not designed cannot be adequately
b) The grinding surface of centre de-
pressed wheels must be mounted below
the plane of the guard lip. An improperly
plane of the guard lip cannot be adequately
c) The guard must be securely attached
to the power tool and positioned for
maximum safety, so the least amount
of wheel is exposed towards the opera-
tor. The guard helps to protect the operator
from broken wheel fragments, accidental
contact with wheel and sparks that could
d) Wheels must be used only for recom-
mended applications. For example: do
not grind with the side of cut-off wheel.
Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to
e)
that are of correct size and shape for
your selected wheel. Proper wheel
ing the possibility of wheel breakage.
Flanges for cut-off wheels may be different
Original instructions
f) Do not use worn down wheels from larg-
er power tools. Wheel intended for larger
power tool is not suitable for the higher
Always pay attention to the wheel rota-
tion direction. The torque reaction is in the
opposite direction of the rotation direction
at the point of binding and this is a prereq-
Always guide the machine in such a way
that sparks and dust can scatter away
from your body. Power tools generate
sparks which may burn your clothes or un-
Grinding and cutting-off operations on
freshly painted metal structures is not
allowed before the paint has become
dry. -
plastics, etc.) and panel structures
is not allowed.
Grinding and cutting-off operations on
not allowed.
Grinding and cutting-off operations of
containing at present or having con-
substances or materials is not allowed
Abrasive Cutting-Off Operations:
a) Do not "jam" the cut-off wheel or apply
excessive pressure. Do not attempt to
make an excessive depth of cut. Over-
stressing the wheel increases the loading
and susceptibility to twisting or binding of
the wheel in the cut and the possibility of
b) Do not position your body in line with
and behind the rotating wheel. When the
wheel, at the point of operation, is moving
away from your body, the possible kickback
may propel the spinning wheel and the
c) When wheel is binding or when inter-
rupting a cut for any reason, switch off
the power tool and hold the power tool
- motionless until the wheel comes to a
complete stop. Never attempt to remove
There is a
7
EN