Chapter 3, Using the Orion G Gas Utility Instrument
Minimum Readings
(MIN) (FIGURE 3-11)
• This page shows the
lowest level of oxygen
recorded by the Orion G
Detector since:
• Turn-ON or
• MIN reading
was reset.
• The MIN flag appears
in the upper portion of the
display.
• To reset the MIN Reading:
1. Access the Min page.
2. Push and hold the
CHANGE/RESET
button until the MIN
flag flashes.
3.
Push the
ON-OFF/PAGE
button to reset the
MIN.
NOTE:
The following
pages appear
only if the
instrument is
equipped with
the Datalogging
option.
Short Term
Exposure Limits
(STEL) (FIGURE 3-12)
• The STEL flag appear in the upper portion of the display to
show the average exposure over a 15-minute period.
3-14
Figure 3-11. MIN Reading on
Display
Figure 3-12. Exposure Page with STEL
Alarm
Operating Manual