Tabla de contenido
Idiomas disponibles
Idiomas disponibles
(2) Pull the trigger to drive a nail with keeping your face
and hands away from the nose muzzle.
(3) Remove finger from the trigger.
Remove the nailer from workpiece and reposition into
the next pre-punched metal hole.
Repeat same process.
(4) When charge the nail length, remove the all nails in
the magazine.
WARNING
Keep your finger off the trigger except during
nailing operation, because serious injury could
result if the push lever accidentally contacts you
or others in work area.
Keep hands and body away from the discharge
area. The nail may bounce from the recoil of
driving a nail, possibly causing injury.
NOTE:
THIS is a SEQUENTIAL TRIP MECHANISM, and should
be used in accordance with all warnings and
instructions.
Always handle nails and package carefully. If nails are
dropped, collating paper may be broken.
After nailing:
1) disconnect air hose from the Nailer;
2) remove all nails from the Nailer;
3) supply 5 – 10 drops of Hitachi pneumatic tool
lubricant into the air plug on the Nailer; and
4) open the petcock on the air compressor tank to
drain any moisture.
— 15 —
English
Tabla de contenido
