• When )Tourcamcorder is on, you can check the approximate
amount of remaining batter), power with the
remaining batter), indicator at the upper left on the LCD screen.
To remove
the
battery
pack
(;lose
the LCD screen.
Slide the BATT
(batter},)
release
lever @ and remove
the batter}, pack
®.
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the batter}, pack."
Notes
on the
battery
pack and the AC Adaptor
• When you remove the hattery pack or disconnect
the AC Adaptor, close the LCD screen and make sure
that the 1_ (Movie)/O
(Photo) lamps (p. 14) are turned of_L
• Do not short-circuit
the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
• In the deflmlt setting, the power turns off automatically
if you leave ),our camcorder
without any
operation
for about 5 minutes, to save battery power ([A.SHUT OFF]).
63
You can charge the battery
pack in any countries!regions
using the AC Adaptor
Supplied with
your camcorder
within
the AC 100 V: 240 V, 50 Hz/60 Hz range.
, Do not use an electronic voltage transformer.
_3