Care & Maintenance - kiwy S 123 Manual De Instrucciones

VII. Care & Maintenance Instructions
WARNING! Never lubricate any component of your child seat, just keep
it nice and clean.
Plastic parts can be easily cleaned by using just soapy water; never use
solvents, alcohol or any harsh cleaning agents.
Cleaning: when your cover gets dirty, remove it (see below) and wash it
at 30°; do not use chemical cleaners; do not wring, nor tumble-dry; do
not iron. Please observe the instructions on its washing label.
Removing the fabric cover:
Remove the safety harness completely as shown in diagrams 16-19.
Release the cover from the four buttons located at the rear of the
backrest (Fig.28).
To remove the seat cover stretch the lower elastic edge and remove the
cover by sliding it over the armrests.
The cover can be washed following the instructions on the label inside
the cover.
To place the cover back on to the child car seat, repeat these operations,
in reverse order.
COVER MAINTENANCE
In case of light soiling, sponge the fabric cover with a mild detergent
and warm water. Or, refer to the care label attached to the fabric cover.
MATERIALS
Frame: Polypropylene – High density Polyethylene - Polyamide - Steel
Cover: 100% Polyester
MEASURES
L: 44 cm, H: 71 cm, W: 45 cm.
12