kiwy S 123 Manual De Instrucciones página 18

HOW TO RECLINE THE CHILD CAR SEAT
Turn the child car seat upside down; then turn the spacer to the open
position (Fig.14).
Place the child car seat onto the
appropriate car seat. Push the child car
seat against the backrest of the car seat (Fig.15).
FIXING THE CAR SEAT - FROM 15 TO 25 KG
(Application range from 3 to 6 years of age approximately).
Remove the safety harness before fitting the child car seat.
Release both shoulder straps from the connector located on the rear
part of the backrest. Remove both straps from the backrest, sliding
them through the holes located on the backrest (Fig.16).
Remove the crotch strap and shoulder straps, inserting the ends
through the slots located under the base of the seat and on the seat
cover (Fig.17).
Pull the adjustment strap, until the connector is close to the rear part of
the child car seat (A) (Fig.18).
When the safety harness has been removed, fix the adjustment strap
located at the base of the child car seat.
Turn the spacer for partially reclining the backrest to the open position
(Fig.19).
Fasten the front part of the belt to the safety harness connector,
passing it under the base of the child car seat (B).
Store the safety harness in a safe place.
To fit the safety harness to the child car seat again, repeat the
operations carried out to remove the harness in the reverse order.
Place the child seat on the appropriate vehicle seat, facing forward (in
the direction of travel).
Check that the vehicle's backrests are blocked in vertical position.
Ensure the vehicle seat in the most rearward position.
Push vigorously the child car seat against the backrest of the car seat
and as far back as possible.
Sit the child into the child car seat and fasten the safety belt, ensuring
that both the lap and the diagonal sections of the belt are inserted
through the belt guide opening located on the armrest which is
8